About the maintenance of aluminum plate cutting machine
【Case summary】：The aluminum plate cutting machine can process precise plates, and cut the plates to achieve the purpose of use. The cut plates can be used in acrylic products, architectural decoration, craft gifts, electronic films, cloth leather and other industries according to different characteristics. Therefore, many companies use aluminum plate cutting machines. However, many people did not carry out a regular maintenance after using the aluminum plate cutting machine, resulting in a reduction in the service life of the aluminum plate cutting machine, which is not conducive to subsequent use. Today we look at how to better maintain the aluminum plate cutting machine equipment. |
The aluminum plate cutting machine can process precise plates, and cut the plates to achieve the purpose of use. The cut plates can be used in acrylic products, architectural decoration, craft gifts, electronic films, cloth leather and other industries according to different characteristics. Therefore, many companies use aluminum plate cutting machines. However, many people did not carry out a regular maintenance after using the aluminum plate cutting machine, resulting in a reduction in the service life of the aluminum plate cutting machine, which is not conducive to subsequent use. Today we look at how to better maintain the aluminum plate cutting machine equipment.
1. In the lubrication place, the fitting place of the support rod and the press frame ring, the front and rear axles of the connecting rod frame, the cylinder joint and the two ends of the roller in the feeding and discharging, check once a week, and add lubrication at the right time to avoid jamming. Loss of downtime.
2. The oil injection cooling system of this machine uses an oil injector, which uses the principle of siphon to suck the cooling oil to the nozzle and cool the saw blade, in order to avoid the blockage of air compressor parts and cause malfunction.
3. Regularly (every week at best) check whether the belt is excessively worn, whether it is parallel, and whether the belt surface pressure is too loose or too tight.
4. If the pneumatic parts are malfunctioning or inoperative during operation, please replace the malfunctioning pneumatic parts.
5. Cutting oil: This oil spray group can spray CPC-R32 or saponified oil, the air volume can be adjusted and the left and right oil volume can be controlled separately. Use aluminum alloy cutting oil or water-soluble cutting oil (saponified oil) 1:20, the ratio should not be too thin To avoid excessive moisture causing rust or jamming, check whether the amount of oil is sufficient every day, and replenish it when it is insufficient. Adequate cooling can increase the life of the tool and reduce the burrs of aluminum cutting.
5. Check whether the air duct is damaged or not every day. If there is any damage, please replace it with a new one to prevent the machine from failing to work normally due to water leakage.
For specific details, please call our service hotline: 138-2577-9334. Mintech Electronics focuses on the development and production of aluminum plate engraving machines and aluminum plate cutting machines. Can help you solve the problem of difficult plate cutting. Welcome to consult.
