The difference between aluminum composite panel processing and aluminum veneer processing technology

　　There are two types of aluminum veneer in the world: fluorocarbon sprayed aluminum veneer and roll coated. There is no stick coating production line in China for the time being, so the processing process of aluminum veneer here is mainly about fluorocarbon sprayed aluminum veneer production. Aluminum composite panel processing has four steps: forming, painting, compounding and trimming. In the process of aluminum veneer processing, the processing of the sheet is relatively simple, and most of the spraying process requires manual completion, while the aluminum composite panel The processing is automated processing.

　　What are the differences between aluminum veneer and aluminum composite panel?

　　1. From the appearance

　　The flatness of the aluminum veneer is not as high as that of the plastic panel, but it can be processed into various required shapes, while the aluminum-plastic panel cannot be processed into an irregular shape at will. The spraying of aluminum veneer is mainly manually operated. It can be processed regardless of the quantity, and there are many choices of colors. Aluminum-plastic panels can only be rolled after a certain quantity.

　　2. From a performance point of view

　　Aluminum veneer has better mechanical properties than plastic panels. Its wind resistance, compression resistance, and seismic resistance are higher, and it has higher strength and rigidity. Both types of panels can protect against lightning. And fire prevention.

　　3. From the perspective of the installation process

　　The installation steps of the two types of boards are roughly the same, but the veneer will be processed into the required style in the factory, and then installed directly at the construction site, while the plastic board needs to be cut and other operations at the construction site. In terms of the overall process, it is more economical to install the single board.

　　4. From the perspective of cost

　　The aluminum veneer is mainly made of pure aluminum or aluminum alloy. The aluminum-plastic board uses a three-layer structure, which contains PVC or PE materials. Therefore, the cost of the aluminum-plastic board is much cheaper than that of the aluminum veneer. .

　　The two types of boards have their own characteristics, and which one to use can be determined based on the actual situation. If it is an environment that requires irregular shapes, a variety of colors, and requires more strength, aluminum veneer should be used, and vice versa. It is enough to use aluminum-plastic panels.