Service Hotline:0769-81884018-13825779334 中文版  /  ENGLISH  /  
10+years technology precipitation more than 20 patents to bring you professional sheet CNC machining solutions for a wide range of industries
your current location:

Causes of plate breakage of pc board processing equipment

release time:2021-10-15 The number of clicks:371


【Case summary】The pc board processing equipment is one of our machines for processing and cutting. Because the pc board processing equipment is easy to operate, has complete functions, and has good engraving and cutting effects, it is an entry-level preferred product, so many companies choose to use this. However, during the use of the equipment, many companies and manufacturers did not comply with the standards used, causing problems with the board. So today, let's summarize the reasons for the damage of the pc board during processing.


  The pc board processing equipment is one of our machines for processing and cutting. Because the pc board processing equipment is easy to operate, complete functions, good engraving and cutting effects, it is an entry-level preferred product, so many companies choose to use this. However, during the use of the equipment, many enterprises and manufacturers did not comply with the standards used, which caused problems with the board. So today, let's summarize the reasons for the damage of the pc board during processing.

pc board processing equipment

  1. Use sealant and sealant pads suitable for polycarbonate plastics. The wet test sealant paste shall be applied when the management system is installed in the wet test.

  2. The CNC blades or articles used in the production and processing must not cause any harm to the non-production processing position of the plate, and the wound can be moisturized. Because minor hazards can also lead to unoptimistic cracking.

  3. Do not destroy or remove the protective film before the installation is completed to avoid scratching the surface.

  4. It is never allowed to nail the PC board to the frame immediately, otherwise it will cause high stress and destroy the edge of the hole due to the expansion of the board.

  Mintech Electronics' products are mainly used in: aerospace, rail transit, boats, special vehicles, building curtain walls, etc.; fundamentally solve technical problems in the processing of aluminum alloys, engineering plastics and other sheet materials, so as to continuously promote the development of processing equipment Technology upgrade; is the current domestic technological model industrial-grade CNC machining equipment manufacturer.

  For specific details, please call our service hotline: 138-2577-9334. Welcome to consult us.

Next: there is none left