Operating points of using pp sheet cutting machine

　　The sheet cutting machine is a CNC machine tool developed by our Mintech Electronics in order to better cut and engrave the sheet. As the latest CNC machine tool, the pp sheet cutting machine has thickened sheet metal structure, aluminum profile precision milling guide surface, and servo Drive, screw drive, high-precision and high-quality cutting, so that the sheet can be better used in the required industries, so how to operate the pp sheet cutting machine to better use it? Today we will look at the pp sheet cutting machine Operational precautions.

　　1. Check the storage of coolant in the motor spindle cooling before use, turn on the motor's spindle cooling to ensure the normal circulation of the coolant. Turn on the positive pressure seal to prevent processing waste and coolant from entering the motor spindle bearing.

　　2. The material for the card installation must be firm, and the principle of "installation, installation, and installation" must be followed, and it is strictly forbidden to carry out engraving in the place where the material is suspended.

　　3. When installing the card tool, clean the dust and debris in the card head first, put the card head into the pressure cap and place it upright, then install it on the motor spindle and insert the tool into the card head, and finally pin Squeeze the cap tightly. When the upper and lower knives loosen the pressure cap, it is strictly forbidden to use the push-pull method, but the rotary method. When cutting off the knife, clean the pressure cap and the scraps on the turn, loosen the pressure cap to remove the tool, and then unscrew the pressure cap to take out the chuck.

　　4. When installing the clamping tool, the length of the tool exposed to the clamping head must refer to the engraving depth file and the fixture. When the conditions are met, the length of the exposed chuck should be as short as possible. When the total length of the tool is less than 22mm, it is strictly forbidden to continue to use it.

　　For specific details, please call our service hotline: 138-2577-9334. Mintech Electronics focuses on the R&D and production of plate cutting machines and plate cutting saws, and is committed to creating more efficient and simple CNC machine tools. Our Mintech Electronics has a professional and powerful technical team and can help you in time. After-sales team. Welcome to consult us.