How to maintain pp sheet cutting machine

　　The pp sheet cutting machine is a very common sheet cutting machine now, because the pp sheet cutting machine can not only be used to cut pp sheets, just like pc sheets, aluminum sheets, pe sheets, etc. can all be cut by pp sheet cutting machines , Because pp sheet has many characteristics of sheet, so general sheet can also use pp sheet cutting machine, so many companies choose pp sheet cutting machine, but many people don't know how to maintain the pp sheet cutting machine used Process, today we will look at how to maintain the pp sheet cutting machine.

　　1. The dirt on the machine tool and guide rails must be cleaned up every working day to keep the machine bed clean. The air source and power supply must be turned off when off work, and the remaining air in the machine tool tube belt must be evacuated.

　　2. If you leave the machine for a long time, turn off the power to prevent non-professional operation.

　　3. Pay attention to observe whether there is lubricating oil on the surface of the machine's horizontal and longitudinal guide rails and racks to keep them well lubricated.

　　1. The machine should be cleaned up every week, the horizontal and vertical guide rails, the transmission gear rack should be cleaned, and the lubricating oil should be added.

　　2. Check whether the horizontal and vertical rail wipers work normally, and replace them in time if they are abnormal.

　　3. Check whether all the cutting torches are loose, clean up the rubbish of the ignition muzzle, and keep the ignition normal.

　　For specific details, please call our service hotline: 138-2577-9334. Mintech Electronics focuses on various aluminum plate cutting machines, aluminum plate engraving machines, sheet cutting machines and pp sheet cutting machines, etc. Mintech Electronics has achieved higher cutting accuracy, more stable equipment and machine tools, and simpler man-machines. Interactive system. Welcome to consult.