Service Hotline:0769-81884018-13825779334 中文版  /  ENGLISH  /  
10+years technology precipitation more than 20 patents to bring you professional sheet CNC machining solutions for a wide range of industries
your current location:

Precautions for operating pvc engraving machine

release time:2021-08-24 The number of clicks:361


【Case summary】We must pay attention to the operation matters when we process various pvc, pe, pom, aluminum plates and other plates every day. Although our pvc engraving machine is a highly intelligent CNC machine tool, it can be through a simple man-machine The interactive system accomplishes many things, but the causes of accidents in our lives are some small daily operation problems, which are easy to be ignored by us. Today, let’s take a look at what we should pay attention to during the operation of our pvc engraving machine. point.


  We must pay attention to the operation matters when we process various pvc, pe, pom, aluminum plates and other plates every day. Although our pvc engraving machine is a highly intelligent CNC machine tool, it can be through a simple man-machine The interactive system accomplishes many things, but the causes of accidents in our lives are some small daily operation problems, which are easy to be ignored by us. Today, let’s take a look at what we should pay attention to during the operation of our pvc engraving machine. point.

pvc engraving machine

  1. Check the storage of coolant in the motor spindle cooling before use, turn on the motor's spindle cooling to ensure the normal circulation of the coolant. Turn on the positive pressure seal to prevent processing waste and coolant from entering the motor spindle bearing.

  2. The material for the card installation must be firm, and the principle of "installation, installation, and installation" must be followed, and it is strictly forbidden to carry out engraving in the place where the material is suspended.

  3. When installing the card tool, clean the dust and debris in the card head first, put the card head into the pressure cap and place it upright, then install it on the motor spindle and insert the tool into the card head, and finally pin Squeeze the cap tightly. When the upper and lower knives loosen the pressure cap, it is strictly forbidden to use the push-pull method, but the rotary method. When cutting off the knife, clean the pressure cap and the scraps on the turn, loosen the pressure cap to remove the tool, and then unscrew the pressure cap to take out the chuck.

  4. When installing the clamping tool, the length of the tool exposed to the clamping head must refer to the engraving depth file and the fixture. When the conditions are met, the length of the exposed chuck should be as short as possible. When the total length of the tool is less than 22mm, it is strictly forbidden to continue to use it.

  For specific details, please call our service hotline: 138-2577-9334. Mintech Electronics focuses on the development, production and sales of pvc engraving machines, aluminum plate engraving machines , panel cutting saws and other equipment, and has a professional after-sales team to help you solve problems you encounter. Welcome to consult.