Service Hotline:0769-81884018-13825779334 中文版  /  ENGLISH  /  
10+years technology precipitation more than 20 patents to bring you professional sheet CNC machining solutions for a wide range of industries
your current location:

Precautions for the use of aluminum plate cutting machine

release time:2021-08-03 The number of clicks:468


【Case summary】Aluminum plate cutting machine is now a very common processing machine tool, suitable for aluminum honeycomb panels, aluminum composite panels, industrial aluminum panels, aluminum single panels, aluminum profiles, aviation aluminum panels, etc. However, many people who have used this machine tool rarely understand the machining precautions of the aluminum plate cutting machine, resulting in a short service life of the aluminum plate cutting machine, an increase in the accident rate, and the corrected plate is not in the best condition. Today, let's take a look at the attention points of the aluminum plate cutting machine.


  Aluminum plate cutting machine is now a very common processing machine tool, suitable for aluminum honeycomb panels, aluminum composite panels, industrial aluminum panels, aluminum single panels, aluminum profiles, aviation aluminum panels, etc. However, many people who have used this machine tool rarely understand the machining precautions of the aluminum plate cutting machine, resulting in a short service life of the aluminum plate cutting machine, an increase in the accident rate, and the corrected plate is not in the best condition. Today, let's take a look at the attention points of the aluminum plate cutting machine.

 

Aluminum plate cutting machine

 

  1. Pay attention to the temperature: The operating temperature of the sunbeam board is 80℃, and it will be deformed at high temperatures. So keep the temperature at least below 50 degrees.

  2. Pay attention to damage and scratches: The surface hardness of acrylic resin is the same as that of aluminum. Although plastic belongs to the hard category, you must pay attention to it when using it. To protect the surface, paste protective paper on acrylic resin. In use, in order to prevent the adhesion of scars and dust, I suggest you try to paste the protective paper during use and peel it off at the end. In addition, during the operation, due to the protection of hands, the surface of the board must be protected. Please wear protective equipment and gloves. When removing dirt on the surface of the board, clean it with a soft cloth dipped in water or neutral detergent.

  3. Precautions for adhering dust: Pay attention to dust prevention. If you wipe the acrylic resin surface with a dry cloth, it will have a tendency to rub and charge, and it will easily adhere to the air, causing dust and scars. Please pay attention. It is recommended to wipe gently with a soft cloth moistened with antistatic agent or methanol containing antistatic agent.

  The application of aluminum plate cutting machine is very wide, but it is also necessary to pay attention to whether the operation is standardized when using it to avoid unnecessary losses. For specific details, please call our service hotline: 0769-81884018. Welcome to consult. Products are mainly applied in industries: aerospace, rail transit, boats, special vehicles, building curtain walls, etc.; fundamentally solve technical problems in the field of sheet metal processing such as aluminum alloys and engineering plastics, so as to continuously promote the technological upgrade of processing equipment; An industrial-grade CNC machining equipment manufacturer with exemplary technology in China. Welcome to consult.