Service Hotline:0769-81884018-13825779334 中文版  /  ENGLISH  /  
10+years technology precipitation more than 20 patents to bring you professional sheet CNC machining solutions for a wide range of industries
your current location:

Precautions for the use of aluminum plate engraving machine

release time:2021-08-18 The number of clicks:305


【Case summary】Engraving machine is a commonly used engraving equipment. The aluminum plate engraving machine to be mentioned today is a new generation of CNC machine tool engraving equipment. It not only has more precise engraving strength and more engraving plates, but also has more engraving machine industries and a simpler person. Machine interactive system, but no matter how good the equipment is, the CNC machine tool will inevitably have problems when it is used for a long time. Today, let’s look at the problems and maintenance methods of the aluminum plate engraving machine.


  Engraving machine is a commonly used engraving equipment. The aluminum plate engraving machine to be mentioned today is a new generation of CNC machine tool engraving equipment. It not only has more precise engraving strength and more engraving plates, but also has more engraving machine industries and a simpler person. Machine interactive system, but no matter how good the equipment is, the CNC machine tool will inevitably have problems when it is used for a long time. Today, let’s look at the problems and maintenance methods of the aluminum plate engraving machine.

Aluminum plate engraving machine

  1. One of the three axes cannot move. At this time, check whether the drive block corresponding to the corresponding axis is damaged. The inspection method can use the replacement method: unplug the aviation plug corresponding to the fixed axis, and plug it into the drive corresponding to the other active axis. If the immovable shaft moves normally after the exchange, it can indicate that the corresponding drive block of the shaft is damaged and the drive block needs to be replaced; if the immovable shaft still does not work, it means that the cable or motor is faulty and the cable or motor needs to be replaced. .

  2. All three axes cannot move. At this time, check whether the three-axis aviation plug has been connected to the control box, whether the power of the control box is turned on, and whether the data cable is connected to the control box and the control card in the host computer. If the above is normal, please contact the factory.

  3. The spindle cannot operate normally. At this time, check the error code displayed on the LED display of the inverter (see the error code item in the inverter manual).

  Regarding electronic mechanical equipment, in our daily use, the problems of the equipment are very avoided. We must regularly check the status of the machine to extend the service life of the machine. For specific details, please call our service hotline: 138-2577-9334. Welcome to consult.