The plate cutting machine is a kind of equipment that many plates need to go through before being put into use. The plate cutting machine can make the cut plates have better practicability, but the use of the plate cutting machine also has a certain risk factor. When using pp plate cutting Attention should also be paid to safety issues when the machine is being machined. Through our continuous in-depth research and development of Mintech Electronics , the pp sheet cutting machine has made major breakthroughs in safety, but novices must be trained by professionals to operate independently. Today we Let's take a look at the things that need to be paid attention to when using a pp sheet cutting machine.

　　1. Do not process a material before it is clear whether it can be irradiated or heated by laser, so as to avoid the potential danger of smoke and steam.

　　2. When the equipment is started, the operator shall not leave the post or be taken care of without authorization. If it is necessary to leave, the operator should stop the machine or cut off the power switch.

　　3. Keep the fire extinguisher within easy reach; turn off the laser or shutter when not processing; do not place paper, cloth or other flammable materials near the unprotected laser beam.

　　4. When an abnormality is found during the processing, the machine should be shut down immediately, and the fault should be eliminated or reported to the supervisor in time.

　　5. Keep the laser, the bed and the surrounding area clean, orderly, and free of oil pollution. Workpieces, plates, and waste materials are stacked as required.

　　Whether it is pp sheet processing, aluminum sheet processing or any other material processing and cutting, we need to know the characteristics of the material before we can perform the cutting operation to minimize the probability of accidents. Mintech Electronics focuses on sheet cutting machines, pp sheet cutting machines and other equipment, so that they have a simple human-computer interaction system and higher cutting accuracy. Welcome to consult us.