PVC engraving machine is a kind of sheet engraving machine commonly used for pvc sheet and aluminum sheet engraving. It can engrave the surface of the sheet. The pvc engraving machine belongs to a type of numerical control system, so it has certain requirements for the power grid environment. This system is located There should be no welding machines, frequently started machine tools, power tools, radio stations, etc. on the power grid. Strong electrical signals will cause system errors, inaccurate engraving accuracy, poor cutting engraving quality, and so on. Today, let's take a look at some maintenance methods of our pvc engraving machine.

　　1. One of the three axes cannot move. At this time, check whether the drive block corresponding to the corresponding axis is damaged. The inspection method can use the replacement method: unplug the aviation plug corresponding to the fixed shaft and plug it into the drive corresponding to the other active shaft.

　　2. If the immovable shaft moves normally after the exchange, it can indicate that the drive block corresponding to the shaft has been damaged and the drive block needs to be replaced. If the shaft still does not move, it means that the cable or motor is faulty. Replace the cable or motor. None of the three axes can move. At this time, check whether the three-axis aviation plug has been connected to the control box and whether the power of the control box has been turned on. Whether the data line is well connected with the control box and the control card in the host computer. If all the above are normal, please contact us Minteying.

　　3. The spindle cannot operate normally. First check the error code displayed on the LED display of the inverter (see the error code item in the inverter manual).

　　For specific details, please call our service hotline: 138-2577-9334. Mintech Electronics focuses on the development and production of equipment. Its aluminum plate engraving machine, aluminum plate cutting machine, plate cutting machine, plate cutting saw and other products can be applied to most of the current processing industries. Welcome to consult.