PVC engraving machine is a kind of Mintech laser engraving machine, because it is good at engraving PVC sheet, PS sheet, PE sheet, PA sheet, aluminum sheet and so on, so pvc engraving machine can also be called aluminum sheet engraving machine. Through the pvc engraving machine, high-quality engraving processing can be carried out on the plate. But when we use the pvc engraving machine, we should also pay attention to it. Before or after the use of the engraving machine, a check cycle must be carried out to determine whether the state of the machine can be processed next time.

　　Because the sheet metal processing industry does not allow large-scale engraving errors, we need to perform the following inspections on pvc engraving machines and other engraving equipment:

　　1. The pvc engraving machine regularly cleans the dust in the electrical box (according to the use situation), and checks whether the terminal screws are loose, so as to ensure the safe and reliable use of the circuit.

　　2. The pvc engraving machine regularly (according to the usage) checks whether the screws of the machine parts are loose.

　　3. After the pvc engraving machine is used, pay attention to cleaning. Be sure to clean up the dust on the platform and transmission system, and regularly (weekly) lubricate the transmission system (XYZ three-axis).

　　4. The continuous running time of the pvc engraving machine is less than 10 hours a day to ensure the cleanliness of the cooling water and the normal operation of the water pump. Never make the water-cooled spindle motor lack water. Replace the cooling water regularly to prevent the water temperature from being too high.

　　For specific details, please call our service hotline: 138-2577-9334. Mingteying Electronics is committed to the research and development and production of various aluminum plate engraving machines, aluminum plate cutting machines, processing equipment and plate cutting saws. Welcome to consult.