Maintenance knowledge of pvc engraving machine

　　Whether it is an aluminum plate engraving machine or a pvc engraving machine , it is our CNC laser engraving machine, which belongs to the CNC machine tool system. Therefore, our equipment is sometimes subject to strong power grid interference, which leads to computer and engraving. The machine system works abnormally, so when we use the pvc engraving machine, there should be no related electric welding machine equipment nearby. Only the maintenance of the pvc engraving machine can extend the service life of the equipment. Today, let’s take a look at the maintenance process of our Mintech electronic pvc engraving machine.

　　1. The continuous operation time is less than 10 hours per day to ensure the cleanliness of the cooling water and the normal operation of the water pump. Never make the water spindle motor lack water. Replace the cooling water regularly to prevent the water temperature from being too high. If the working environment temperature is too low in winter, the water in the water tank can be replaced with antifreeze.

　　2. Every time the machine is used, pay attention to cleaning. Be sure to clean up the dust on the platform and transmission system, and lubricate the transmission system (X, Y, Z axis) regularly (weekly). (Note: X, Y, Z three-axis polished rods are maintained with oil; the screw part is added with high-speed butter; if the working environment temperature is too low in winter, the screw and polished rod (square rail or round rail) part should be washed and cleaned with gasoline first , And then add oil, otherwise it will cause excessive resistance in the transmission part of the machine and cause the machine to displace.)

　　3. For the maintenance and inspection of electrical appliances, the power supply must be cut off, and only after the monitor has no display and the main circuit power indicator light goes out.

　　It is necessary for the maintenance of CNC machine tools, because high-end precision equipment is highly intelligent, and the pvc engraving machine cannot be caused by large errors due to usage habits, resulting in product defects. For specific details, please call our service hotline: 138-2577-9334. Welcome to consult.