The aluminum plate cutting machine is mainly used for cutting and engraving aluminum plates, aluminum profiles, composite plates, etc. Minteying Electronics reminds everyone that preparations must be made before the aluminum plate cutting machine is turned on to avoid malfunctions and accidents during the work process.

　　1. The operator must be familiar with the performance, use and operation precautions of the aluminum plate cutting machine before operation. Novices are strictly forbidden to operate on the machine alone. Check all parts of the machine and equipment, fill in the "Equipment Inspection Form" carefully, and check whether the electrical grounding wire is intact and reliable. Adequate lighting should be provided for night work.

　　2. The aluminum plate cutting machine must be dedicated by a dedicated person, and other personnel are not allowed to use it without the permission of the workshop supervisor.

　　3. Before operation, it is strictly forbidden to wear gloves, necklaces, slippers, operate the machine after being sick or drinking, wear work clothes, goggles, and masks, and check whether personal clothes are worn to ensure that the "three tight" necklines and clothes are tight. The sleeves are tight and the hem of the jacket is tight; the hair braids of female workers should not be exposed outside the work hat.

　　4. Check whether there is any sundries in the work area to prevent slipping. Check whether the saw blade is sharp and locked. The saw blade must be flat, with sharp teeth, no two consecutive missing teeth, and no cracks.