The pvc engraving machine can be used for the engraving and cutting activities of the sheet, not only the pvc sheet, as long as we are within the specification range and the area and size are suitable, we can use the pvc engraving machine for many sheets, including the pe board. , Pc board, aluminum board and so on. Although our pvc engraving machine is powerful and easy to use, in our daily use, have we paid attention to the use of pvc engraving machine? Have you noticed the equipment maintenance of pvc engraving machine? Only to do a good job of protection Only then can the pvc engraving machine be better used and its maximum ability can be exerted. Today we will look at how to maintain the pvc engraving machine.

　　1. Check before starting up every day, such as: whether the communication line, motor line, and optocoupler line are loose and whether the voltage is stable; then turn on the power of the machine, operate the machine to move back and forth twice, and start work.

　　2. After the day's work is completed, first take off the carving knife and let the spindle chuck and lock nut be in a relaxed state. This is helpful to extend the service life of the spindle chuck. Then we start to clean the work surface, which can be cleaned with a brush; note that it is usually best not to pile up all debris on the work surface to avoid deformation of the platform.

　　3. Maintenance of the engraving machine when it is not in use for a long time: When the engraving machine is not used for a long time, it should be powered on 1-2 times a week, especially during the rainy season when the ambient humidity is relatively high. Let the engraving machine run dry for about an hour. The heat generated by the electrical components is used to dissipate the moisture in the numerical control system to ensure the stable and reliable performance of the electronic components.

　　For specific details, please call our service hotline: 138-2577-9334. Mintech Electronics now has different specifications of aluminum plate engraving machines, aluminum plate cutting machines, plate cutting saws, etc., like pvc engraving machines, each device can use a variety of plates, we have a professional customer service team, Welcome to consult.