The pvc engraving machine is one of the most commonly used engraving machines. The pvc engraving machine can not only engrave, but also engrave, cut, and cut materials such as aluminum, pe, pom, etc. It is a non-omnipotent CNC machine tool. , We also call it aluminum engraving machine. Since it is a CNC machine tool, we need to pay attention to the cutting specifications of the equipment, applicable plates, etc. during the purchase process, otherwise it is easy to damage the pvc engraving machine and reduce the service life of the equipment. Today, let's take a look at the purchase and purchase precautions of pvc engraving machine.

　　Engraving machine transmission mode: At present, small CNC engraving machines are divided into three transmission modes, screw drive, rack drive and synchronous belt drive.

　　Drive system introduction: At present, the engraving machine drive system is mainly divided into two categories: stepping system and private server system. The stepping system occupies a dominant position. This is because it is economical and can meet the requirements of general customers. The stepping system belongs to the accuracy of a semi-closed loop system. Calculated by the step angle, the private server system is completely closed-loop mode. There is a measurement feedback system in it, so the accuracy is relatively high, the power is large, the operation is stable, and the customers with high requirements can choose the machine with the private server drive system.

　　Relatively long service life and lower accuracy than the screw machine. The Y-axis and X-axis of the rack and pinion machine are driven by rack and pinion, and the Z axis is generally driven by screw. The accuracy requirements are mainly determined by the meshing accuracy of the guide rail and the rack and pinion. The size and length of the machine can be large enough for easy maintenance. It is generally equipped with a manual oil injection system. It is recommended that the processing speed can reach about 15 meters.

　　For specific details, please call our service hotline: 138-2577-9334. Mintech Electronics focuses on the research of CNC machine tools such as aluminum plate engraving machine, aluminum plate cutting machine, pvc engraving machine and so on. Welcome to consult.