PC board processing equipment is a kind of engraving equipment that we commonly use now. Of course, it can also be used for cutting and cutting. Our pc board processing equipment is a high-end CNC machine tool. The equipment itself is large in size and precise inside. Many parts cooperate with the operation of the computer to precisely engrave the processing of the plate, but we should pay more attention to the operation status of the equipment in daily use to avoid engraving problems during the production process of the operation. Today, let's take a look at the maintenance precautions of pc board processing equipment.

　　1. The continuous operation time is less than 10 hours per day to ensure the cleanliness of the cooling water and the normal operation of the water pump. Never make the water spindle motor lack water. Replace the cooling water regularly to prevent the water temperature from being too high. If the working environment temperature is too low in winter, the water in the water tank can be replaced with antifreeze.

　　2. Every time the machine is used, pay attention to cleaning. Be sure to clean up the dust on the platform and transmission system, and regularly lubricate the X, Y, and Z axes of the transmission system. X, Y, Z three-axis polished rods are maintained with oil; the screw part is added with high-speed butter; if the working environment temperature is too low in winter, the screw, polished square rail or round rail should be washed and cleaned with gasoline first, and then the oil is added , Otherwise it will cause excessive resistance in the transmission part of the machine and cause the machine to displace.

　　3. For the maintenance and inspection of electrical appliances, the power supply must be cut off, and only after the monitor has no display and the main circuit power indicator light goes out.

　　In addition, we should also pay attention to the operation of pc board processing equipment should try to avoid power tools, radio stations, power grids and other facilities with strong interference signals, which are likely to affect the pc board processing equipment. For specific details, please call our service hotline: 138-2577-9334. Welcome to consult.